Description of Fire Suppression System
A pure “green” gas without residue or pollution after extinguishment, IG541 mixed gas is a type that is colorless, tasteless, nontoxic, and nonconducting (52% nitrogen, 40% argon, and 8% carbon dioxide). And it has 0 ODP. It is an environmentally friendly gas that can be used to put out fires. Additionally, this functionality allows it to be used in specific locations where electrical fires are prone to occur.
The entire system can be automatically activated when extinguishing equipment and electrical accessories are used together. It can automatically initiate the extinguishing device using a solenoid actuator after monitoring the situation in the protective area with detectors. So the system as a whole can fully automate. As a result, it may be avoided that no one notices the fire when it breaks out, and it also saves a lot of money on hiring someone to oversee the protective area.
An IG541 fire suppression system is a type of fire suppression system that uses a combination of three inert gases: nitrogen, argon, and carbon dioxide to extinguish fires in an enclosed space. The mixture of these gases is commonly known as IG541, which means “Inert Gas 54% Nitrogen, 44% Argon and 2% Carbon Dioxide” by volume.
IG541 fire suppression systems work by reducing the oxygen concentration to extinguish the fire. The system is designed to flood the protected area with the IG541 mixture, which displaces the oxygen and disrupts the combustion process, causing the fire to go out.
IG541 fire suppression systems are commonly used in areas where water-based suppression systems are not suitable and where the use of chemicals or other agents is not acceptable due to potential adverse effects on equipment or materials. They are typically used in areas such as data centers, computer rooms, archives, and other high-value assets.
IG541 fire suppression systems are environmentally friendly as they are composed of non-toxic and non-ozone-depleting gases. The system is also highly effective and fast-acting, allowing for the rapid suppression of a fire once it is detected.
It is important to have the IG541 fire suppression system installed and maintained by qualified professionals to ensure proper functioning and maximum safety. Regular testing and inspection of the system are also critical to ensuring that it is operating correctly during a fire emergency.
Parameters of Fire Suppression System
| No. | Specification | Technical Parameter | |
| 1 | Working Pressure | 15Mpa | |
| 2 | Device Model | QMH15/80 | QMH15/90 |
| 3 | Capacity | 80Ltr | 90Ltr |
| 4 | Filling Capacity of Gas | 16.89kg | 19kg |
| 5 | Outside Diameter of Cylinder | Φ279mm | Φ325mm |
| 6 | Height of Cylinder | 1578+73mm | 1345+60mm |
| 7 | Spraying Time | ≤120s | |
| 8 | Filling Rate | 0.211kg/L | |
| 9 | Power | DC24V/1.6A | |
| 10 | Nitrogen Pressure of Driving Device | 6.0±1.0Mpa(20℃) | |
| 11 | Condition of Reserving Room for Container | temperature: 0~50℃ | |
| 12 | Max Working Pressure | 17.2Mpa | |
| 13 | Min Working Pressure | 13.6Mpa | |
Application of Fire Suppression System
- Buildings: To protect occupants and property from fire damage, fire suppression systems are frequently installed in commercial and residential buildings. These systems frequently incorporate sprinkler systems, fire extinguishers, and fire alarms.
- Data Centers: A fire has the potential to completely destroy the vital information and technology housed in data centers. Data centers are protected from fire damage by fire suppression systems, such as pre-action systems that put out fires with both gas and water.
Packages
We always pack it with polyfoam first and then put it into a wooden case. Sometimes, in order to meet with customers or the safety requirement, we will make a pallet for the goods.
Mimic Diagram
Multiple cylinders for one zone
Multiple cylinders for multiple zones
After-Sale Service
• We have an efficient sales and after sales team to promise slove all client’s question in time.
• We provide 8×6 hrs technical support and service.
FAQ
• Q: Are you a manufacturer or a trading company?
A: We are a manufacturer.
• Q: Is the OEM order available?
A: Yes, produce in accordance with per client’s requirement.
• Q: Where is your factory located? Can I visit there?
A: Our factory is located in Guangzhou, Guangdong province, China.
Yes, we always welcome and wait for your visit.