Product Description:
FM-200 Total Flooding Clean Agent System refers to a specific application method of using FM-200 (HFC-227ea) for fire suppression. In a total flooding system, the agent is discharged into an enclosed space or protected room in sufficient concentration to suppress or extinguish fires throughout the entire volume. This method ensures that all parts of the protected area are saturated with the agent, creating a homogeneous atmosphere that prevents re-ignition.
Here are key aspects of an FM-200 Total Flooding System:
- Design and Installation: These systems are meticulously designed based on the protected space’s dimensions, fire hazards present, and ventilation conditions. The goal is to achieve and maintain the required minimum concentration of FM-200 for a specific period (usually 10 minutes) to successfully extinguish the fire.
- Detection and Activation: Total flooding systems incorporate advanced detection technology, typically involving smoke detectors, heat sensors, or a combination of both, along with a control panel. Once a fire is detected, the system will sound alarms, giving occupants time to evacuate before the FM-200 is released automatically or manually, depending on the system configuration.
- Agent Storage: FM-200 is stored in pressurized cylinders, typically located outside the protected area. Upon activation, the agent is released through a network of pipes and nozzles strategically placed to ensure even distribution throughout the space.
- Post-Discharge: After a discharge, the FM-200 rapidly disperses, leaving no residue or wetting agents behind. This allows for quick re-entry and minimal downtime for the protected facility. However, a qualified technician must inspect and recharge the system before it can be put back into service.
- Regulatory Compliance: Total flooding systems using FM-200 must adhere to national and international standards such as NFPA 2001 (National Fire Protection Association) in the United States and equivalent standards globally. Environmental regulations regarding the use of HFCs should also be considered, with a shift towards lower Global Warming Potential (GWP) alternatives encouraged.
- Versatility: FM-200 total flooding systems are suitable for a wide range of applications, including data centers, telecommunications facilities, archives, museums, offshore platforms, and many other areas where water-based suppression systems could cause damage.
It’s important to note that regular maintenance, testing, and inspection by certified professionals are crucial to ensuring the effectiveness and safety of an FM-200 total flooding system.
Technical Parameters:
| Fire Extinguishing Agents | FM200 Clean Agents |
|---|---|
| Classification | Halocarbon |
| Molecular Weight | 170.03 |
| Appearance | Clear |
| MF | C3HF7 |
| Flammability | Non-Flammable |
| Safety | High |
| Moisture PPm | ≤10s |
| Name | FM200 Clean Agents |
| Form | Liquid |
| Fire Class | A,B,C |
Applications:
The FM200 Clean Agents can be used in a wide range of applications, including data centers, telecommunication facilities, power plants, museums, archives, hospitals, and more. It is particularly suitable for protecting valuable assets that require fast and effective fire suppression without causing damage to the surrounding equipment or environment.
One of the key advantages of the FM200 extinguishant is its ability to extinguish fires quickly by removing heat from the fire triangle. When released, the FM200 Clean Agents rapidly absorb heat and cool the combustion zone, preventing the fire from spreading and extinguishing it within seconds. This makes it an effective solution for Class A, B, and C fires, including those involving flammable liquids, gases, and electrical equipment.
The FM200 Clean Agents are also environmentally friendly, with a low global warming potential and a short atmospheric lifetime. It is also non-corrosive and non-conductive, reducing the risk of damage to equipment and electronics. Additionally, the FM200 extinguishant is easy to install and maintain, with low moisture content (≤10ppm) and a transport package that includes a plywood outer box with a bubble bag or paper.
In summary, the FM200 Clean Agents from Guangzhou Xingjin Fire Equipment Co.,Ltd. are a highly effective and environmentally friendly fire extinguishing agent, suitable for a wide range of applications. Its fast response time, low toxicity, and zero ozone depletion potential make it an ideal solution for protecting valuable assets and critical environments. With its high purity (99.9%≥) and low moisture content, the FM200 extinguishant is a reliable and easy-to-maintain solution for fire suppression.
Support and Services:
The FM200 Clean Agents product technical support and services include:
- Product installation and commissioning support
- Product operation and maintenance advice
- Product troubleshooting and repair assistance
- Product upgrade and retrofit guidance
- Product training and certification programs
Our team of experienced technicians and engineers are available to provide comprehensive technical support and services to ensure the reliable and efficient operation of your FM200 Clean Agents system.
Shipping:
- Ships in sturdy, corrugated cardboard boxes
- Boxes are marked with product information and handling instructions
- Ships via ground transportation
- Ships within the United States only
FAQ:
Q: What is the brand name of the FM200 Clean Agents product?
A: The brand name of the product is Guangzhou Xingjin Fire Equipment Co.,Ltd.
Q: What is the model number of the FM200 Clean Agents product?
A: The model number of the product is fm200 extinguishant.
Q: Where is the FM200 Clean Agents product manufactured?
A: The product is manufactured in Guangzhou, Guangdong, China.
Q: Is the FM200 Clean Agents product safe to use?
A: Yes, the product is safe to use as it is non-toxic, non-corrosive, and does not leave any residue.
Q: What types of fires can the FM200 Clean Agents product extinguish?
A: The product is effective in extinguishing Class A, B, and C fires, which include fires involving ordinary combustibles, flammable liquids, and electrical equipment.